This document provides the user manual for the WORX 20V Li-ion Blower, models WX094L and WX094L.9. This device is a battery-operated gardening appliance designed for residential use, specifically for moving yard debris outdoors.
Function Description:
The WORX 20V Li-ion Blower is a handheld tool that generates a powerful stream of air to clear leaves, grass clippings, and other light debris from various surfaces. It is intended for outdoor use in residential settings. The blower operates on a 20V Li-ion battery, providing cordless convenience and portability. It features a blower tube for directing the airflow, an interface for connecting the tube, and a blower tube connector. The air is drawn in through an air inlet. The device is equipped with an ON/OFF switch and a variable speed dial, allowing users to adjust the airflow intensity according to their needs. The handle provides a comfortable grip, and a battery pack release button facilitates easy removal and installation of the battery pack.
Important Technical Specifications:
- Model Numbers: WX094L, WX094L.9
- Voltage: 20V Max** (Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts.)
- No Load Speed:
- I: 11000/min
- II: 15000/min
- III: 18000/min
- Air Volume:
- I: 60cfm
- II: 80cfm
- III: 100cfm
- Blow Speed: 160mph
- Charging Time: 2 hours (approx.)
- Machine Weight:
- WX094L: 2.87lbs
- WX094L.9: 2.21lbs
- Ambient Temperature Range for Use and Storage of Tool and Battery: 0°C-45°C
- Recommended Ambient Temperature Range for the Charging System During Charging: 0°C-40°C
Usage Features:
The blower is designed for straightforward operation with several user-friendly features:
- Assembly: The blower tube is easily assembled by sliding it onto the blower tube connector.
- Battery System: The device uses a 20V Li-ion battery pack (e.g., WA3520) and a compatible charger (e.g., WA3742). The battery pack is uncharged upon purchase and must be charged before first use. The charger and battery pack are specifically designed to work together, and using other devices or metallic objects with them is warned against due to electrical failure and hazard risks.
- Battery Installation and Removal: The battery pack is installed by sliding it into the designated slot until it clicks into place, and removed by pressing the battery pack release button and sliding it out.
- Starting and Stopping: The blower is activated using the ON/OFF switch. It's important to note that the tool may run for a few seconds after being switched off, and the motor should come to a complete standstill before setting the tool down.
- Variable Speed Control: The variable speed dial allows users to select from three different speed settings (I, II, III) to control the airflow, providing flexibility for various tasks.
- Safety Precautions: The manual emphasizes several safety measures, including wearing protective gloves, ear protection, and eye protection. Users are advised to read the instruction manual thoroughly, keep bystanders away, and avoid using the blower in rain or wet conditions. The battery pack should be removed before any adjustments, servicing, or maintenance, and the ON/OFF switch should be in the "0" position before assembling or removing accessories.
- Storage: When not in use, the appliance should be stored indoors in a dry, high, and locked-up place, out of reach of children. Idle appliances should be stored indoors.
Maintenance Features:
Proper maintenance ensures the longevity and safe operation of the WORX 20V Li-ion Blower:
- Cleaning: The tool should be cleaned regularly. It is crucial to keep the product dry and never spray it with water. For cleaning, only mild soap and a damp cloth should be used. Harsh detergents, cleaners, or solvents containing chemicals that could damage the plastic should be avoided.
- Lubrication: The product uses self-lubricating bearings, so no additional lubrication is required.
- Battery Care:
- Keep the battery pack clean and dry. Wipe terminals with a clean, dry cloth if dirty.
- Charge the battery pack before use, using only the charger specified by WORX.
- Do not leave the battery pack on prolonged charge when not in use.
- After extended storage, it may be necessary to charge and discharge the battery pack several times to achieve maximum performance.
- The battery pack performs best at normal room temperature (20 °C ± 5 °C).
- When disposing of battery packs, keep different electrochemical systems separate and dispose of them properly.
- The RBRC Corporation, in partnership with POSITEC Inc., offers a free recycling service for Positec batteries with the RBRC-call2recycle seal. Users can call 1-800-822-8837 for proper battery disposal.
- Inspection: Before further use, check for damaged parts such as guards or other components. Ensure proper operation by checking for alignment of moving parts, binding, breakage, or any other condition that might affect operation. Damaged parts should be repaired or replaced by an authorized service center unless otherwise specified.
- General Maintenance: Follow instructions for lubricating and changing accessories. Keep handles dry, clean, and free from oil and grease. Do not modify or attempt to repair the appliance or battery pack except as indicated in the instructions. Servicing should be performed by a qualified repair person using identical replacement parts to maintain product safety.
Need help?
To Next Page
General
