20V Li-ion Blower EN
11
CLEANING THE TOOL
Clean the tool regularly.
WARNING! Keep your product dry.
Under no circumstances spray with water.
- To clean the tool, use only mild soap and a damp
cloth.
- Do not use any type of detergent, cleaner or solvent
which may contain chemicals that could seriously
damage the plastic.
- Self lubricating bearings are used in your product,
therefore lubrication is not required.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0°C-45°C.
The recommended ambient temperature range for
the charging system during charging is 0°C-40°C.
To Next Page
Loading...
