11
EN
COMPONENT LISTS
1. SPINDLE LOCK BUTTON
2. WHEEL GUARD
3. WHEEL
4. FLANGE
5. SCREW
6. HEX KEY M4
7. 14” 6.4 MM BUTTERFLYTYPE BLADE ARBOR ADAPTER
*Not all the accessories illustrated or described are included in standard
delivery.
TECHNICAL DATA
WX741L WX741L.X**
Rated Voltage
20 V Max***
Motor type Brushless
No load speed 5000-24000 rpm
Blade size
2’’ (50 mm)
1 1/2’’ ( 38mm)
Blade bore
3/8’’ (9.5 mm) (only for 2’’ balde)
1/4”(6.4 mm) Butterfly-type with adapter (only for 1 1/2’’ blade)
Spindle thread M4
Machine weight (bare tool) 0.29 lbs (130 g)
** X may be followed by one or two characters. All models are the same except
model number and trademark. The suffix in models may be number from “1” to
“99” or English letter “A” to “Z” or “M1” to” M9” which means different package or
the various of accessories packed in the package.
***Voltage measured without workload. Initial battery voltage reaches maximum
of 20 volts. Nominal voltage is 18 volts.
Category Model Capacity
20V Hub/HubX
WA7150
Input: 20 V 10 A Max.
Output: 20 V 10 A Max.
WA7151
Input: 20 V 10 A Max.
Output 1: 20 V 10 A Max.
Output 2: 5 V 2 A (USB port)
Only use the appropriate accessories intended for this tool. Accessory information can
be found on the product packaging, at a Worx dealer or on our website at www.worx.com.
MakerX series tools and 20V Hub/HubX are specially designed to work together, so do
not attempt to use any other devices.
To Next Page
Loading...
Need help?
General
