To Next PageTo Next Page
Need help?Do you have a question about the Worx WX801 and is the answer not in the manual?
The English version of the original operating instructions.
The German version of the original operating instructions.
The French version of the original operating instructions.
The Italian version of the original operating instructions.
The Spanish version of the original operating instructions.
The Dutch version of the original operating instructions.
The Polish version of the original operating instructions.
The Hungarian version of the original operating instructions.
The Romanian version of the original operating instructions.
The Czech version of the original operating instructions.
The Slovak version of the original operating instructions.
The Portuguese version of the original operating instructions.
The Swedish version of the original operating instructions.
The Slovenian version of the original operating instructions.
Guidelines for maintaining a safe and well-lit work environment, avoiding explosive atmospheres, and keeping bystanders clear.
Precautions regarding power tool plugs, earthed surfaces, water exposure, cord handling, and RCD protection.
Advice on staying alert, using PPE, preventing unintentional starting, and removing adjustment keys before operation.
Instructions on correct tool usage, maintenance, avoiding force, disconnecting power, storage, and accessory care.
Guidelines for charging, using, storing, and handling battery packs to prevent hazards like fire and injury.
General safety guidelines for using the angle grinder as a grinder or cut-off tool.
Information and precautions regarding kickback, a sudden reaction to a pinched or snagged rotating accessory.
Specific safety advice for grinding and abrasive cutting-off operations, including wheel selection and mounting.
Specific safety advice for abrasive cutting-off operations, covering wheel jamming, body positioning, and cut interruption.
Crucial safety instructions for handling, charging, storing, and disposing of battery packs to prevent hazards.
Defines the machine's purpose for cutting, roughing, and brushing metal and stone materials without water.
Steps to perform before operating the tool, including battery pack management.
Instructions for securing the spindle, attaching discs, and adjusting the wheel guard.
Instructions for installing the battery pack, ensuring the tool is off.
How to operate the power tool using the On/Off switch for continuous use.
Identification and use of the designated hand grip areas for safe operation.
Warning against using cutting discs for rough grinding applications.
Instructions related to performing cutting operations with the angle grinder.
General
