15
EN
Maintain this tool in accordance with these instructions and keep well lubricated
(where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of
days.
ACCESSORIES
WX801 WX801.9
Metal cutting discs 2 2
Abrasive cutting disc
1 1
Grinding disc 1 1
Hex key 1 1
Charger (WA3860)
1 /
Battery Pack (WA3551.1)
1 /
We recommend that you purchase your accessories from the same store that sold
you the tool. Refer to the accessory packaging for further details. Store personnel
can assist you and offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction book carefully.
INTENDED USE:
The machine is intended for cutting, roughing and brushing metal and stone
materials without using water. For cutting metal, a special protection guard for
cutting (accessory) must be used.
ASSEMBLY AND OPERATION
ACTION FIGURE
BEFORE OPERATION
Removing the Battery Pack See Fig. A1
Charging the Battery Pack See Fig. A2
ASSEMBLY
To Next Page
Loading...
