7
TECHNICAL DATA
Type Designation WX680 (6-designation of machinery, representative of high
frequency oscillation tool)
Rated voltage
230-240V~50Hz
Rated power 350W
Oscillations speed 11000-20000/min
Protection class
/II
Tool weight (without power cable)
1.3kg
NOISE INFORMATION
A weighted sound pressure
L
pA
: 87dB(A)
A weighted sound power
L
wA
: 98dB(A)
K
PA
& K
WA
3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
Vibration emission value a
h
=3.68m/s
2
Uncertainty K=1.5m/s²
– The declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another;
– The declared vibration total value may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
To Next Page
Loading...
Need help?
General
