9
SAFETY INSTRUCTION FOR
CUTTING
1. Hold power tool by insulated gripping
surfaces, when performing an
operation where the cutting accessory
may contact hidden wiring. Cutting
accessory contacting a “live” wire may
make exposed metal parts of the power
tool “live” and could give the operator an
electric shock.
2. Always wear a dust mask.
SYMBOLS
Accessories can become very hot
while working, presenting danger
of burns!
Make sure the tool is unplugged
prior to changing accessories.
Wear protective gloves
High oscillation frequency.
Low oscillation frequency:
Waste electrical products must not
be disposed of with household
waste. Please recycle where facili-
ties exist. Check with your local
authorities or retailer for recycling
advice.
WARNING–To reduce the risk of
injury, user must read instruction
manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Before working with your tool make
sure that no power cords will be
damaged.
Avoid danger of injury from the
sharp edges of the accessories.
To Next Page
Loading...
Need help?
General
