8
Brush Cutter Attachment EN
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Wear ear protection
Wear head protection
Wear protective gloves
Wear protective footwear
The distance between the machine
and bystanders shall be at least 15 m
Beware of thrown objects
Beware of blade thrust
Li-Ion battery, battery must be recycled
Do not burn
Batteries may enter water cycle if
disposed improperly, which can be
hazardous for ecosystem. Do not
dispose of waste batteries as unsorted
municipal waste.
Remove battery from the socket before
carrying out any adjustment, servicing
or maintenance.
POSITEC Inc. has established a partnership with the
RBRC Corporation to recycle any Positec batteries
with the RBRC-call2recycle seal. For environmental
protection, please do not discard batteries in the
trash. After the batteries’ life cycle is ended, then
please call 1-800-822-8837 for a free service that will
properly dispose of the battery.
COMPONENT LIST
1. BLADE GUARD
2. BLADE
3. COVER/BLADE HOUSING
4. LOCK-NUT
5. WASHER
6. SHOULDER STRAP
Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
WA0221
No load speed
6700r/min
Cutting diameter 10'' (25cm)
Machine weight 3.97lbs (1.8kg)
ACCESSORIES
WA0221
Wrench
1
Hex key
1
Shoulder strap
1
Safety-stop handle
1
Only use the appropriate accessories intended for
this tool. Accessory information can be found on
the product packaging, at a Worx dealer or on our
website at www.worx.com.
To Next Page
Loading...
Need help?
General