20VCordlessLi-Ion Hedge Trimmer
EN
8
original packaging until required for use.
v) Observe the plus (+) and minus (–) marks on
the battery and ensure correct use.
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Do not burn
Batteries may enter water cycle if
disposed improperly, which can
be hazardous for ecosystem. Do
not dispose of waste batteries as
unsorted municipal waste.
Keep hands away
Remove battery from the socket
before carrying out any adjustment,
servicing or maintenance.
Wear protective gloves.
Li-Ion
Li-Ion
Li-Ion battery. This product has
been marked with a symbol
relating to ‘separate collection’ for
all battery packs and battery pack. It
will then be recycled or dismantled
in order to reduce the impact on
the environment. Battery packs can
be hazardous for the environment
and for human health since they
contain hazardous substances.
COMPONENT LIST
1. BATTERY PACK RELEASE BUTTON*
2. BATTERY PACK*
3. REAR HANDLE
4. FRONT HANDLE
5. SAFETY GUARD
6. FRONT SWITCH LEVER (ALL AROUND
SWITCH FUNCTION)
7. REAR SWITCH LEVER
8. BLADE
9. BLADE SHEATH*
*Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
WG261E/
WG261E.1
WG261E.9
Voltage 220-240V~50/60Hz
Power 20V
Max** Lithium
No load speed 2200/min
Max. cutting length
45cm
Cutting diameter 16mm
Charging
time(WG261E)
58 mins
Charging
time(WG261E.1)
230 mins
Machine Weight 2.4 kg 2.0 kg
**Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.