What to do if my Worx WG505E doesn't turn on?
If your Worx Blower isn't working, there are a couple of things to check. First, make sure the Blower/Vacuum Tube is properly attached to the Motor Housing. If it is not, attach the Blower/ Vacuum Tube to the Motor Housing. Also, verify that the power cord is securely connected to a working power source. If it is not, connect the power cord to a power source.
What to do if my Worx WG505E Blower doesn't operate?
If your Worx Blower/Vac doesn't start, make sure the blower/vacuum tube is properly attached to the motor housing. Also, verify that the power cord is securely connected to a functioning power source.
How to fix a jammed Worx WG505E?
If your Worx Blower is jammed, it's likely due to debris blockage. Check the Impeller for any obstructions and remove any clogged debris from the Impeller. Also, inspect the Blower/Vacuum Tube and the connection of the Leaf Collection Bag for blockages, remove any clogged debris from these areas.
Why is my Worx Blower clogged?
If your Worx Blower/Vac is jammed or clogged, there might be debris blocking the impeller. Clear any obstructions from the impeller to resolve this. Alternatively, check the blower/vacuum tube or the leaf collection bag connection for blockages and remove any debris present.
How to fix a jammed Worx Lawn and Garden Equipment blower/vac?
If your Worx Lawn and Garden Equipment blower/vac is jammed or clogged, it's likely due to debris blocking the impeller or the blower/vacuum tube, or the connection of the leaf collection bag. To resolve this, remove any clogged debris from the impeller, blower/vacuum tube, or the leaf collection bag connection.
General| Power Source | Electric |
|---|---|
| Air Volume | 12 m³/min |
| Cable Length | 10 m |
| Mulching Ratio | 10:1 |
| Collection Bag Capacity | 45 L |
| Voltage | 230 V |
To Next Page
