Worx WG508 - Trouble Shooting

Blower/Vac/Mulcher EN
13
1212
TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSES CORRECTIVE ACTION
The Blower/Vac
does not operate.
The Vacuum Tube or the Fan Cover
is not attached to the Motor
Housing.
Attach the Vacuum Tube or the Fan
Cover to the Motor Housing.
Power cord is not connected to the
power source.
Connect the power cord to a power
source.
The Blower/
Vac jammed or
clogged.
Debris blocking in the Impeller.
Remove clogged debris from the
Impeller.
Debris blocking in the Blower Tube
or the connection of the Leaf
Collection Bag.
Remove clogged debris from the
Blower Tube or the connection of
the Leaf Collection Bag.