6
Accessories
TCT blade (on machine planing width: 82mm PPL01A blade) 1set
Socket spanner 1pc
Rebate & parallel guide 1pc
Only use reversible twin cutting blades that cannot be reground.
We recommend that you purchase your accessories from the same
store that sold you the tool. Use good quality accessories marked
with a well-known brand name. Choose the type according to the
work you intend to undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and offer advice.
•
•
•
1
2
3
4
5
6
7
8
9
1
0
11
1
2
13
14
15
Additional safety points for your
planer
Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
When an extension cable is required you must ensure it has the
correct ampere rating for your power tool and is in a safe electrical
condition. Fully unwind cable drum extensions to avoid potential
overheating.
Ensure your mains supply voltage is the same as indicated on the
rating plate.
Your tool is double insulated for additional protection against a
possible electrical insulation failure within the tool.
Always check walls, floors and ceilings to avoid hidden power
cables and pipes.
After long working period’s external metal parts and accessories
could be hot.
Wear eye protection when operating this tool.
The base plate must always be held firmly against the material
being cut to reduce vibration and blade jumping.
If possible, ensure the workpiece is firmly clamped to prevent
movement.
Your Planer is a hand held tool; do not clamp your planer.
Before cutting, check the cutting line is free of nails, screws, etc.
Never stop the cutting blade by applying pressure to the blade.
Only withdraw the planer from the cut when the blade has stopped
moving.
Only use blades in excellent cutting condition.
Do not put your fingers into the sawdust dust extraction. Use a
To Next Page
Loading...
Need help?
General
