Need help?Do you have a question about the Worx WX615 and is the answer not in the manual?
General| Input power | 750 W |
|---|---|
| Power source | AC |
| Idle speed | 17000 RPM |
| Rebating depth | 12 mm |
| Planing depth (max) | 3 mm |
| Planning width (max) | 82 mm |
| Product color | Black, Orange |
| Dust extraction port | Yes |
Weight and Dimensions| Weight | 3000 g |
|---|
General safety precautions for the work environment, covering cleanliness, lighting, and explosive atmospheres.
Guidelines for safe electrical connections and usage, including grounding, wet conditions, and cord safety.
Recommendations for operator safety, including alertness, PPE, preventing unintentional starts, and proper dress.
Instructions on proper tool application, maintenance, and storage to ensure safety and performance.
Wait for the cutter to stop before setting the tool down to prevent accidents.
Hold the tool by insulated surfaces to avoid electric shock from cord contact.
Warning about factors affecting actual vibration and noise emissions during use.
Caution regarding potential hand-arm vibration syndrome from tool use.
Advice on reducing exposure to vibration and noise.
Describes the machine's purpose for planning wooden materials and beveling edges.
Instructions on how to set the desired cutting depth using the adjustment knob.
Procedure for safely removing and changing the planer blades.
Procedure for correctly installing a new or reversed planer blade.
Crucial safety warning to disconnect power before any maintenance.
Mandatory safety step to disconnect power before performing any work on the tool.
Warning about kickback and advice on applying the machine to the workpiece.
To Next Page
