8
LED 4-in-1 Light EN
1. LENS
2.
LAMP HEAD
3. LIGHT STICK
4. PIVOT JOINT
5. FUNCTION SWITCH BUTTON
6. HANDLE
7. BATTERY PACK RELEASE BUTTON*
8. BATTERY PACK*
9. LANYARD
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
WX027 WX027.9
Rated voltage 20V Max**
Rated Wattage 18W
Charger voltage 100-240V ~ 50/60Hz
Brightness
Flashlight 120LM
Lantern 510LM
Desk
Lamp
Desk
Lamp Hi
480LM
Desk
Lamp Lo
220LM
SOS 0/510LM
Burntime
(2.0Ah)
Flashlight 16h /
Lantern 8h /
Desk
Lamp
Desk
Lamp Hi
7h /
Desk
Lamp Lo
18h /
SOS 12h /
Pivoting head -72°~+72°
Light stick rotation -45°~+45°
Positions 3
Machine weight
800g 400g
**Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
The LED bulbs in this light are designed to last
50,000 hours. They cannot be replaced.
ACCESSORIES
WX027 WX027.9
Battery Pack (WA3551.1) 1 /
Charger (WA3760) 1 /
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the tool. Refer to the accessory packaging for
further details. Store personnel can assist you and offer
advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ACTION FIGURE
BEFORE OPERATION
Charging the battery pack See Fig. A
Installing/Removing the battery pack See Fig. B
OPERATION
Switch Button Functions
1st Flashlight
Press the
function
switch
button(5)
for 3
seconds,
the light is
off.
2nd Lantern
3rd
Desk
Lamp Hi
4th
Desk
Lamp Lo
5th SOS
6th (Press
& Hold)
OFF
FOUR FUNCTION MODE
1. FLASHLIGHT
- Press function switch button(5) the
first time, the LED light is on. This tool
is in down position.
WARNING! Do not direct the
light beam into eyes.
See Fig. C
To Next Page
Loading...
Need help?
General
