3-speed Workshop Blower EN
7
Do not burn
Li-I on
Do not dispose of batteries, Return
exhausted batteries to your local
collection or recycling point.
Make sure the battery is removed
prior to changing accessories.
Wear protective gloves.
Waste electrical products must
not be disposed of with house-
hold waste. Please recycle where
facilities exist. Check with your local
authorities or retailer for recycling
advice.
COMPONENT LIST
1. BLOWER TUBE
2.
INTERFACE
3.
BLOWER TUBE CONNECTOR
4.
AIR INLET
5.
ON/OFF SWITCH
6.
VARIABLE SPEED DIAL
7.
HANDLE
8.
BATTERY PACK RELEASE BUTTON
*
9. BATTERY PACK*
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type WX094 WX094.9 (09-designation of
machinery, representative of Blower)
WX094 WX094.9
Voltage 20 V Max**
No load speed
I: 11000/min
II: 15000/min
III: 18000/min
Air volume
I: 1.6 m3/min
II: 2.2 m3/min
III: 2.8 m3/min
Blow speed 257km/h
Charging time 1 hrs (approx.)
Machine weight 1.68kg 1.3kg
** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
ACCESSORIES
WX094 WX094.9
Blower tube 1 1
Battery pack (WA3551.1)
1 /
Charger (WA3880) 1 /
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the blower. Refer to the accessory packaging
To Next Page
Loading...
Need help?
General
