15
3.TECHNICAL DATA
Type designation
WX100L WX100L.X WX108L WX108L.X (1-designation of machinery, representative of hand hold
drill )
WX370L WX370L.X (3- Décignation de Mercinary, représentable de Hammer Drill)
WX100L
WX100L.X **
WX108L
WX108L.X
**
WX370L
WX370L.X **
Rated voltage 20V Max***
No-load speed 0-400/0-1600/min 0-400/0-1600/ min
Impact rate / / 0-6800/0-27200/min
Number of clutch position 20+1 20+1+1
Max torque 265 in-lbs (30Nm) 400 in-lbs (45Nm) 442 in-lbs (50Nm)
Chuck capacity 3/8” (10mm) 1/2” (13mm) 1/2” (13mm)
Max. drilling
capacity
Wood 1” (25mm) 1-1/2“ (40mm) 1-1/2“ (40mm)
Metal 3/8” (10mm) 1/2” (13mm) 1/2”(13mm)
Masonry / / 1/2”(13mm)
Machine weight（bare tool） 1.72lbs (0.78kg) 1.79lbs (0.81kg) 2.21lbs (1kg)
** X may be followed by one or two characters. All models are the same except model number and trademark.The suffix in
models may be number from “1” to “999” or English letter “A” to “Z” or “M1” to” M9” which means different package or the
various of accessories packed in the package.
***Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts
To Next Page
Loading...
