24
i) Power tool needs to be charged before use.
Always refer to this instruction and use the correct
charging procedure.
j) Do not maintain power tool on charge when not in
use.
k) After extended periods of storage, it may be
necessary to charge and discharge the power tool
several times to obtain maximum performance.
l) Battery gives its best performance when it is
operated at normal room temperature (20 °C ± 5
°C).
m) When disposing of cells, keep cells of different
electrochemical systems separate from each other.
n) Recharge only with the charger specified by
WORX. Do not use any charger other than that
specifically provided for use with the equipment. A
charger that is suitable for one type of battery may create
a risk of fire when used with another battery.
o) Keep power tool out of the reach of children.
p) Retain the original product literature for future
reference.
q) Dispose of properly.
r) Do not mix cells of different manufacture, capacity,
size or type within a device.
s) Do not use any cell which is not designed for use
with the equipment.
SYMBOL
To reduce the risk of injury, user
must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Li-Ion battery. This product has
been marked with a symbol relating
to ‘separate collection’ for all battery
packs and battery pack. It will
then be recycled or dismantled in
order to reduce the impact on the
environment. Battery packs can be
hazardous for the environment and
for human health since they contain
hazardous substances.
Do not burn
Batteries may enter water cycle if
disposed improperly, which can
be hazardous for ecosystem. Do
not dispose of waste batteries as
unsorted municipal waste.
To Next Page
Loading...
