Worx WX240 User Manual

13
TROUBLE SHOOTING
problem Possible cause Solution
Battery will
not charge
1. USB cable not
plugged in
2. Surrounding
air temperature
is too hot or too
cold
1. Plug in the USB
cable again, and
check the status
of the lamp and
check whether
the current is
connected
2. Move the
product to an
environment
with appropriate
temperature for
charging
During
operation,
the
screwdriver
stops
working
The battery of
screwdriver is
dead, or the
torque cannot
reach
Charge or increase
torque
FOR BATTERY TOOLS
The ambient temperature range for the use and storage
of tool and battery is 0
o
C-45
o
C.
The recommended ambient temperature range for the
charging system during charging is 0
o
C-40
o
C.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed
of with household waste. Please recycle where
facilities exist. Check with your Local Authority or
retailer for recycling advice.
DECLARATION OF CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description Battery operated screwdriver
Type designation WX240 WX240.X (2-designation
of machinery, representative of screwdriver)
Function Tightening and loosening screws, nuts
Complies with the following Directives:
2006/42/EC
2014/30/EU
2011/65/EU&(EU)2015/863
Standards conform to
EN 62841-1
EN 62841-2-2
EN 55014-1
EN 55014-2
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany

Worx WX240 Specifications

General

Handle shape	Straight handle
Product type	Power screwdriver
Product color	Black, Grey, Orange
Chuck diameter	-
Adjustable speed	Yes
Torque (max)	5 N⋅m
Torque (min)	2.5 N⋅m
Idle speed (max)	300 RPM
Battery life	0.75 h
Power source	Battery
Charging time	1.5 h
Battery voltage	3.6 V
Battery capacity	1.5 Ah
Number of bits	24 pc(s)

Weight and Dimensions

Weight	670 g