8
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should also take
account of all parts of the operating cycle such as the times when the tool is switched off and when it is running
idle but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
0
C or less.
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
WX254 WX254.1 WX254.4
1” Hex Shank Screwdriver Bits 5 11 5
25mm Pilot hole drill Bit 1 1 1
3-5hr Charger 1 1 1
Bit Cartridge 1 2 1
Holster / 1 /
Cradle 1 1 /
To Next Page
Loading...
Need help?
General
