Angle Grinder EN
8
workpiece. Let the wheel reach full speed
and carefully re-enter the cut. The wheel
may bind, walk up or kickback if the power tool is
restarted in the workpiece.
e) Support panels or any oversized workpiece
to minimize the risk of wheel pinching and
kickback. Large workpieces tend to sag under
their own weight. Supports must be placed under
the workpiece near the line of cut and near the
edge of the workpiece on both sides of the wheel.
f) Use extra caution when making a “pocket
cut” into existing walls or other blind areas.
The protruding wheel may cut gas or water
pipes, electrical wiring or objects that can cause
kickback.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
Before any work on the machine itself,
pull the mains plug from the socket
outlet.
Wear protective gloves
COMPONENT LIST
1. ON / OFF SWITCH
2. HAND GRIP AREA
3. AUXILIARY HANDLE
4. SPINDLE LOCK BUTTON
5. WHEEL GUARD FOR GRINDING
6. OUTER FLANGE
7. INNER FLANGE
8. SPINDLE
9. SPANNER
10. METAL GRINDING DISC
Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type WX713 (700-749 - designation of
machinery, representative of Angle Grinder)
Voltage 230-240V~50Hz
Power input 800W
Rated speed 12000/min
Protection class
/II
Spindle thread M14
Disc size 125 mm
Disc bore 22.2 mm
Machine weight 1.5 kg
Thickness of grinding wheels 6 mm
NOISE INFORMATION
A weighted sound pressure L
pA
=89.2 dB(A)
A weighted sound power L
wA
=100.2 dB(A)
K
PA
&K
WA
= 3.0 dB (A)
Wear ear protection
To Next Page
Loading...
Need help?
General
