Worx WX800.9 User Manual

11
WX800 WX800.9
Lithium-Ion cordless
angle grinder
5. When cutting very hard material best results can
be achieved with a diamond disc.
6. When using a diamond disc it will become very
hot. If this happens you will see a full ring of
sparks around the rotating disc. Stop cutting and
allow to cool at no load speed for 2-3 minutes.
7. Always ensure the workpiece is firmly held or
clamped to prevent movement.
MAINTENANCE
Remove the battery before carrying out any
adjustment, servicing or maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.
TROUBLESHOOTING
Although your new angle grinder is really
very simple to operate, if you do experience
problems, please check the following:
1. If your grinder wheel wobbles or vibrates,
check that outer flange is tight; check that
the wheel is correctly located on the flange
plate.
2. If there is any evidence that the wheel
is damaged do not use as the damaged
wheel may disintegrate, remove it and
replace with a new wheel. Dispose of old
wheels sensibly.
3. If working on aluminum or a similar soft
alloy, the wheel will soon become clogged
and will not grind effectively.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer for
recycling advice.
DECLARATION OF
CONFORMITY
We,
Positec Power Tools (Europe)Ltd, PO Box 6242,
Newbury, RG14 9LT, UK
Declare that the product,
Description WORX Angle Grinder
Type WX800 WX800.9 (800-819
-designation of machinery, representative
of Angle Grinder)
Function Peripheral and lateral grinding
Complies with the following Directives,
2006/42/EC
2011/65/EU
2014/30/EU
Standards conform to:
EN 55014-1
EN 55014-2
EN 60745-1
EN 60745-2-3
The person authorized to compile the
technical file,
Name Russell Nicholson
Address Positec Power Tools (Europe)
Ltd, PO Box 6242, Newbury, RG14 9LT,
UK
Suzhou 2016/07/18
Allen Ding
Deputy Chief Engineer,Testing & Certification

Worx WX800.9 Specifications

General

Power source	Battery
Motor type	Brushed motor
Product color	Black, Orange
Adjustable speed	Yes
Number of handle positions	2
Bore size	22.23 mm
Idle speed (max)	8600 RPM
Grinding disc diameter	115 mm
Vibration level (grinding)	1.5 m/s²

Weight and Dimensions

Width	280 mm
Height	72 mm
Weight	1540 g