20V Cordless Brushless Angle Grinder EN
9
COMPONENT LIST
1. AUXILIARY HANDLE
2. SPINDLE LOCK BUTTON
3. ON/OFF SWITCH
4. BATTERY PACK RELEASE BUTTON *
5. BATTERY PACK *
6. FILTER
7. WHEEL GUARD FOR GRINDING
8. GRINDING DISC
9. SPANNER
10. INNER FLANGE
11. OUTER FLANGE
12. SPINDLE
13. GUARD CLAMPING LEVER
14. WHEEL GUARD FOR CUTTING *
15. ABRASIVE CUTTING DISC *
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type WX812L WX812L.X (812-designation of
machinery, representative of Angle Grinder)
WX812L WX812L.X **
Charger voltage
100-240 V~ 50/60 Hz
Rated voltage
20 V
Max**
No load speed
8500 /min
Disc bore
7/8” (22.2 mm)
Disc size 4-1/2” (115 mm)
Spindle thread 5/8” x 11 UNC
Wheel Grinding (Type 27)
Machine weight (bare
tool)
3.53 lbs (1.6 kg)
** X may be followed by one or two characters. All
models are the same except model number and
trademark.The suffix in models may be number from
“1” to “999” or English letter “A” to “Z” or “M1” to”
M9” which means different package or the various of
accessories packed in the package.
***Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
Category Model Capacity
20V Battery
WA3520 1.5Ah
WA3525 2.0Ah
WA3575 2.0Ah
WA3578 4.0Ah
20V Charger
WA3742 0.4A
WA3875 2.0A
WA3881 2.0A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
To Next Page
Loading...
Need help?
General
