11
5-in-1 Multi Sander
EN
r) Remove the battery from the equipment
when not in use.
s) Dispose of properly.
To reduce the risk of injury, user
must read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Make sure the battery is removed
prior to changing accessories.
Prohibit hands enter before mov-
ing parts stop
Lock
Unlock
Wear protective gloves
Do not burn
Do not expose to rain or water
SYMBOLS
Waste electrical products must not
be disposed of with household
waste. Please recycle where
facilities exist. Check with your
local authorities or retailer for
recycling advice.
Do not dispose of batteries. Return
exhausted batteries to your local
collection or recycling point.
Hot! Do not touch
COMPONENT LIST
1. HYPERLOCK™ ACCESSORY CLAMPING LEVER
2. ON/OFF SWITCH
3. HANDLE
4. HYPERLOCK™ RELEASE BUTTON
5. BATTERY PACK RELEASE BUTTON*
6. BATTERY PACK*
7. PLATE INTERFACE
8. VARIABLE SPEED DIAL
9. DUST BAG
10. FINISHING PLATE
11. RANDOM ORBIT PLATE
12. DETAIL PLATE
13. FINGER PLATE
14. CONTOUR PLATE
15. PAPER PUNCH
* Not all the accessories illustrated or
described are included in standard delivery.
To Next Page
Loading...
