To Next PageTo Next PageWhat to do if my Worx Staple Gun is not working properly?
If your Worx Staple Gun isn't operating correctly and you see a green light flashing, a red light flashing, or both, here's what you can check: * The tool may be overheating, so wait until it cools down. * Ensure that the tool has enough nails and replenish them if necessary. * Check for jammed nails and remove them. * The battery might be low, so recharge it.
What to do if fasteners don't drive fully with my Worx Staple Gun?
If your Worx Staple Gun operates properly, but fasteners don’t drive fully, it could be due to the following: * The depth of drive isn’t deep enough; adjust the depth of drive. * The nail might be too long for the wood hardness; use a nail length that is appropriate for the wood.
Why does my Worx Staple Gun jam frequently?
If your Worx Staple Gun is jamming frequently, consider the following: 1. Make sure you are using the correct size of nails. 2. Replace any damaged nails. 3. Ensure the magazine is not loose by tightening the screws. 4. Clean the magazine, as a dirty magazine may cause jams.
How to prevent fasteners from being driven too deep with my Worx Staple Gun?
If your Worx Staple Gun is driving fasteners too deep, the depth of drive may be set too deep. Adjust the depth of drive accordingly.
General| Type | Cordless Brad Nailer |
|---|---|
| Power Source | Battery |
| Battery Voltage | 20V |
| Battery Type | Lithium-Ion |
| Nail Type | Brad Nails |
| Magazine Capacity | 100 nails |
| Depth Adjustment | Yes |
| Tool-Free Jam Release | Yes |
| Battery Included | Yes |
| Charger Included | Yes |
| Nail Size | 5/8" to 2" (16mm to 50mm) |
Covers safe work area practices, electrical precautions, and personal safety measures.
Guidelines for proper tool usage, maintenance, and preventing unintentional starting.
Safe practices for using, charging, and storing battery packs, and general battery safety warnings.
Specific safety advice for handling and operating the nail gun, including fastener management.
Explanation of warning icons, protective equipment symbols, and battery disposal information.
Details on tool components, features, and technical specifications like capacity and speed.
Data on noise levels and vibration exposure, along with necessary safety precautions.
Guidance on reading instructions, intended use of the tool, and initial setup steps.
Instructions for installing belt hook, loading nails/staples, and selecting nailing modes.
Details on using the on/off switch, adjusting drive depth, and LED worklight functions.
Procedure for removing jammed nails, including safety precautions.
Addresses common operational problems and provides solutions for issues like tool not operating or jamming.
Instructions on proper disposal of waste electrical products and recycling advice.
Details on product description, type, function, directives, standards, and authorized personnel.
