Need help?Do you have a question about the Worx ZIPSNIP WX080 and is the answer not in the manual?
Identifies the switch used to prevent accidental starting of the tool.
Describes the handle designed for comfortable and secure grip during operation.
The switch that controls the tool's power, allowing it to be turned on and off.
Protective cover for the cutting blade to enhance safety during use.
The screw used to secure the blade to the tool holder.
The cutting component of the mini cutter.
A feature of the blade guard that guides the cutting action.
The pin that connects the tool to the charger for power supply.
The device used to recharge the tool's battery.
An LED that shows the charging status of the battery.
The port on the tool where the charger is plugged in.
A feature for hanging or storing the tool.
A slot used to lock the blade during replacement for safety.
Guidelines for maintaining a safe and clear workspace to prevent accidents.
Precautions related to the electrical aspects of the power tool and its use.
Recommendations for operator safety, including alertness and protective equipment.
Instructions on how to properly use, maintain, and care for the power tool.
Guidelines for the safe charging and use of battery-powered tools.
Warnings about handling asbestos materials and avoiding live electrical wires during cutting.
Crucial safety advice on keeping hands away from the blade during operation.
Precautions against accidental activation and dangers associated with battery handling.
Advice on protecting the battery from heat sources to prevent explosion risks.
Instructions for handling defective batteries and potential vapour emission risks.
Important safety instructions specifically for the battery charger unit.
Specifies the materials and thickness the machine is designed to cut.
Detailed steps for safely removing and attaching the cutting blade.
Instructions on how to activate and deactivate the tool's power switch.
Guidance on using the correct charger and understanding battery charging.
Steps for plugging in the charger and tool, and interpreting indicator lights.
Tips for optimal cutting performance and avoiding tool strain.
Recommendations for keeping the machine clean for safe and proper working.
Information on battery safety and regulations concerning the transport of goods.
Advice on the proper disposal of waste electrical products and recycling.
To Next Page
General
