Need help?Do you have a question about the WP MXMA 4800 and is the answer not in the manual?
General| Brand | WP |
|---|---|
| Model | MXMA 4800 |
| Category | Control Unit |
| Language | English |
Procedure for dismantling the front fork legs, detailing the steps for removal and preparation.
Instructions for reassembling the front fork legs, covering component installation and final checks.
Step-by-step guide to disassembling the suspension cartridge, including component separation.
Process for removing the piston rod from the cartridge assembly, ensuring correct part handling.
Instructions for correctly assembling the piston rod, including alignment and piston ring installation.
Procedure to safely remove the screw cap from the cartridge assembly, noting special tool usage.
Steps for reattaching the screw cap, including greasing and thread locking compound application.
Guide to taking apart the compression damping unit, focusing on piston and shim stack removal.
Instructions for reassembling the compression damping, including seal and piston ring replacement.
Procedure for servicing the screw sleeve, involving seal changes and bushing calibration.
Final steps for assembling the suspension cartridge, including oil filling and piston operation.
To Next Page