Need help?Do you have a question about the Wren Kitchens INFINITY PLUS Standard Drawer and is the answer not in the manual?
Secure frontal fixings to the draw front using spiked positions and screws (B).
Connect the draw front to the drawer sides by aligning the mechanism with the fixings.
Adjust drawer frontal height by loosening and turning screws, then re-tightening.
Modify the drawer's rear elevation by turning a specific adjustment screw.
Attach frontal fixings to the deep drawer front using specified screws (B) per bracket.
Connect the deep drawer front to its sides by aligning the mechanism with the fixings.
Adjust the deep drawer's frontal height by manipulating specific screws.
Adjust the deep drawer's rear elevation using the designated screw.
Fully press the rear fixing clip inward to prepare for glass insertion.
Guide the glass into the rear slot of the side panel and orient it parallel.
Slide the glass forward into the front slot, ensuring encapsulation within the side panel.
Reverse installation steps: press clip, slide glass backward, and remove at an angle.
General| Brand | Wren Kitchens |
|---|---|
| Model | INFINITY PLUS Standard Drawer |
| Category | Indoor Furnishing |
| Language | English |
To Next Page