Wren Kitchens Adjustable Corner Base Unit User Manual

For Internal Use:CON.INS.001.001_50-WKIN0006_BASE_AdjCnr_Rev6
FITTING GUIDE
ADJUSTABLE CORNER
BASE UNIT
HEIGHT: 34 1/2”
WIDTH: 36”-42”
DEPTH 24”-25”
(H) x16 1 1/4” Screws (B) x30 5/8” Screws (K) x4 L Bracket - Large
Sample cabinet shown
Step 1.
Secure each leg into place with 2
x 5/8” screws (B). Ensure legs are
rotated as shown so that part is
supporting the end panel.
Step 2.
Use 2 x 5/8” screws (B) to secure each
of the L brackets (K) to the cabinet at
either side.
Step 3.
Place the longer packer ush with the
front edge of the cabinet and screw
through using 2 x 1 1/4” screws (H) to
secure it in place.
Step 4.
Place the shorter packer inside the
cabinet ush with the front edge and
screw through the top and bottom of the
cabinet using 2 x 1 1/4” screws (H) at each
location.
B
Screws for attaching to walls and worktop are not provided as these vary depending
on materials, thickness and construction. Ensure appropriate xings for wall and
worktop construction are used. Please refer to the specialist worktop supplier if
these are required for solid surface worktops.
REQUIRED TOOLS
B
B
H
H
H
K
Page 1

Wren Kitchens Adjustable Corner Base Unit Specifications

General

Brand	Wren Kitchens
Model	Adjustable Corner Base Unit
Category	Indoor Furnishing
Language	English