Removing the frontal
Before installing the unit, remove the frontal
by pulling the release catch.
Place the frontal in the door safe along its
longest length.
Remember to take care when unpacking. Please keep your workspace clean, clear
and tidy when working. This will help keep all items safe from any damages.
Any waste cardboard or plastic should be flattened down and placed in the bin.
Page 2
Removing the drawers
Before installing the unit, remove all drawers.
This is done by pulling the drawer all the way
out, and then pulling the front of the drawer
upwards.
Removing the fixtures and fittings
Remove all fixtures and fittings from the
unit and keep on a clean and level surface,
grouped by product. Place any loose shelves
in the door safe along their longest length.
A minimum of two people will be needed to lift the unit.
Place the drawers on top of a piece of leftover cardboard to protect them from
damage.
To Next Page
Loading...
