To Next PageTo Next Page
Need help?Do you have a question about the Wren Turbines 44i Kerostart and is the answer not in the manual?
Covers critical safety guidelines including fire, hot parts, and general handling of the turbine engine.
Details component weights, physical dimensions, and mounting specifications of the engine.
Lists RPM ranges, power output, torque, and gearbox ratio for optimal operation.
Explains the fundamental operational principle of the two-shaft gas turbine engine.
Provides instructions on how to secure the output shaft for attaching clutch and fan components.
Covers critical safety aspects like engine handling, heat hazards, and appropriate operation environment.
Details requirements for engine air intake, ventilation, mounting, and electrical/fuel line connections.
Describes the Engine Control Unit (ECU) and its display terminal for engine management.
Details the fuel pump, burner valves, and their necessary connection requirements.
Specifies recommended fuels and the importance of filtering at each stage of use.
Details oil-to-fuel ratios, suitable oils, and proper mixing instructions for the engine.
Warns against running the engine at full power on the ground due to significant safety risks.
Guides users through configuring the ECU and transmitter for optimal engine operation.
Explains failsafe programming to ensure engine shutdown upon radio link loss or interference.
Details the mechanical and electrical hookups required for the engine's kerosene start system.
Describes the engine start-up sequence and the process of engine acceleration.
Discusses setting the throttle curve for 3D flying and understanding helicopter dynamics.
Lists common engine issues, their potential causes, and recommended troubleshooting actions.
General| Brand | Wren Turbines |
|---|---|
| Model | 44i Kerostart |
| Category | Engine |
| Language | English |
