Wren Turbines 75 - User Manual

W
W
r
r
e
e
n
n
7
7
5
5
New High Performance
Miniature Gas Turbine Engine
7.5kg – 16.5lbs thrust
Perfect small size, high performance
gas turbine engine for beginners and
expert alike.
Integral FOD screen and high quality
components throughout for long life.
Specifications:
Thrust 75N – 16.5Lbs
Weight – 1030g – 2lb 2oz
Size – 90mm dia x 240mm long (inc
starter)
3-1/2” x 9-1/2” long.
A real quart in a pint pot!!

Summary

Wren 75

Safety Notes

Fire Safety Precautions

Advises on fire extinguisher use and placement.

Operational Safety Distances

Specifies safety zones around the operating engine.

Hearing Protection

Recommends wearing ear defenders due to high noise levels.

Starting Procedure Warnings

General Safety Warnings

Mounting and Installation Safety

Stresses secure mounting and avoiding hand holding or vice clamping.

Heat Management and Burn Hazards

Warns about high temperatures and burn risks.

Ventilation and Exhaust Gas Safety

Advises operating in open air due to exhaust gases.

Flammable Material Precautions

Prohibits use near flammable substances.

Fuel Handling Safety

Details safety precautions for handling turbine fuel.

Starting Gas Safety

Warns about the flammability of starting gas.

Autostart Setup and Operation

Setting the ECU to Radio

ECU Configuration and Calibration

Throttle Calibration Steps

Failsafe Function

Failsafe for PPM Systems

Failsafe for PCM;IPD Systems

Gas Start Operation Check

Running the Engine

Shutting Down the Engine

ECU Basic Settings

ECU Parameter Settings

Wren Turbines 75 Specifications

General

Brand	Wren Turbines
Model	75
Category	Engine
Language	English