3
CAUTION
CAUTION
The incorrect system connection may cause failure and injury. Before connecting the
hydraulic torque wrench and hydraulic hose assembly to the assembled power pack,
make sure the hydraulic torque wrench swivel couplings, hose couplings and hydraulic
power pack couplings are clean and free of debris.
LOOSE OR DIRTY COUPLERS WILL CAUSE TOOL NOT TO OPERATE PROPERLY
DO NOT use old or damaged sockets. use the wrong size sockets.
WARNING
Only use a high quality socket. The socket must measure up to standard ISO-2725 and
ISO-1174 or DIN3129 and DIN3121 or ASME-B107.2/1995. Never use a chrome plated
socket.
WARNING
Always use a pin to lock the socket with the square drive in order to avoid the socket from
falling off.
PROPER SAFETY ATTIRE
When operating hydraulic equipment, use proper safety equipment and clothing. Consult
with your company’s safety representative to obtain this information.
WARNING SIGN
Warning signs are shown in the following table
IF DRIVE STICKS OUT RIGHT,
IT'S SET FOR TIGHTEN.
LEFT. IT'S SET FOR LOOSE!
LOCK REACTION
ARM BEFORE
USING TOOL!
warning table
Meaning
Affixed Position
WORK HEAD
REVERSE LEVER
PROHIBIT USING BY HAND
PRIOR TO USE,FIXED
THE REACTION ARM
REVERSE LEVER
THE SQUARE DRIVE IN
POSITION,LEFT LOOSEN,
RIGHT TIGHTEN
To Next Page
Loading...
