1. Resume
This series bending machines are designed and made carefully and
adopt fast-slow hand pump, overload discharging mechanism and oil
filter in its hydraulic system which features reasonable structure, light in
weight small in volume and long lifespan, etc. It is an ideal bending tools
for bending pipes and tubes.
2. Technical Index
Fuel Tank’s
Volume (15#
lubricant)
3. Operating Instruction
1. Tighten the switch and grease the touch place between supporting
wheel, mould and work piece.
2. Choose the suitable mould according to the size of tube and fit them
on the top of piston rod and mount two supporting wheels with their
notch facing towards the mould. Be sure the supporting wheel must be
To Next Page
Loading...