How to fix a WUBEN E01 that is not bright?
If your WUBEN Flashlight isn't turning on or is not bright, start by opening the switch properly. Then, check the assembly to ensure all parts are correctly tightened. If it still doesn't work, the battery might need charging or may be anti-loading (inserted backward). Remove the battery and re-assemble it. Also, inspect the battery contact points; if they're dirty, clean them with alcohol.
What to do if my WUBEN Flashlight is flashing abnormally?
If your WUBEN Flashlight is flashing abnormally or isn't bright, here's what you can check: * Ensure the switch is fully opened. * Make sure all assembly parts are correctly tightened. * Verify the battery is adequately charged. If not, charge it. * Confirm the battery isn't inserted backward; remove and re-assemble it correctly. * Inspect the battery contact points and clean them with alcohol if they're dirty.
Why is my WUBEN E01 Flashlight making noise?
If your WUBEN Flashlight is making noise, check for any foreign objects that may have fallen inside and pour them out. If the noise persists, it could indicate damaged parts, in that case you should return to the local dealer.
General| Brightness | 1000 lumens |
|---|---|
| Max Beam Distance | 200 meters |
| Water Resistance | IP68 |
| Material | Aluminum alloy |
| Weight | 18g (Excluding Battery) |
| Max Output | 1000 lumens |
| Waterproof | Yes |
| Modes | High, Low |
| Lumens | 1000 |
| Waterproof Rating | IP68 |
| Charging Method | USB-C |
| Impact Resistance | 1.5m |
| Battery | 1 x 18650 |
| Battery Type | 18650 rechargeable battery |
To Next Page
