EasyManua.ls Logo

WUBEN E01 - 3. Operation; 4. Battery status indication

WUBEN E01
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 05 -
E
N
4. Battery status indication
When the battery is low power, the flashlight will dim
automatically until battery totally runs out.
3. Operation
1
Output selections: When the light is on, tap on the tail
switch to cycle through Low-Med-High.
ON/OFF: Click on the tail switch to turn on the flashlight,
click again to turn off the flashlight.
2
SOS: When the light is on, double tap on the tail switch to
activate SOS, tap again to exit.
3
- 05 -
All data from experiments of WUBEN lab according to the ANSI/NEMA FL1 standard,
may vary because of different experiment equipment, experiment environment or
other factors. Experiments are based on Duracell AAA alkaline battery.
Parameters
The O-Ring may be damaged for a long time use, please
replace the O-Ring in time to ensure the waterproofness
of the product.
Please use WUBEN battery or WUBEN recommended
batteries.
Maintenance
/
FL1 Standard
High Med Low SOS
40m
395cd
18g/0.63oz (without battery) 29g /1.02oz(with battery)
1.5m
IP68
(2m underwater for 1h)
6.5h 50h
20
LM
82.5mm × 15mm | 3.25in ×0.59in (L × D)
50mins
100LM 1LM 20LM

Other manuals for WUBEN E01

Related product manuals