Output selections: Single click on switch to cycle
through Low- Med- High- Turbo.
2
4. Flash Mode
8. Low power indication
Blue light constant on (Off after 5s )
Blue light flashes (Off after 5s )Power 90%~41%
Power 100%~91%
Power 40%~15%
Power less than 15%
Red light constant on (Off after 5s )
Red light flashes
6. Instant Turbo
Whenever the light is on or off, double click on switch
to activate Strobe, double click again to activate SOS,
single click to return to the previous status.
3
Turn OFF: Press and hold switch for 2s to turn off
the light.
5. Continuous output selections:
When the light is off, 4 times click on switch to activate
Low output level, press and hold switch, the light will
ramp from to Turbo continuously, and then from
Turbo to, release the switch to lock the output.
When the light is off, press and hold switch to activate
Turbo constant on, click to turn off.
7. Lockout and Unlock
When the light is off, triple click on switch. White light
will blink to indicate lockout. Any operation on the switch
will activate nothing but blue light blink underneath switch
nnless another triple click on the switch to turn the light
on Low output to indicate unlock.
To Next Page
Loading...
