2) Connect iGS130 to your computer via USB cable.
3) Select left button to enter connection mode, then battery icon lights
up.
4) Computer will recognize iGS130 as a new disk, then copy the activity
files in folder as below :\iGPSPORT\Activities\***.fit to computer.
5）Login http://i.igpsport.com, select fit format files to upload.
Note:
1. iGS130 can store about 400 hours’ riding files, when memory is not
enough, it will delete the earliest file automatically. Please upload,
backup and delete the files regularly.
2. The files can be upload to www.strava.com or other website which
support fit format files.
11. FACTORY RESET
Steps:
1) Power off iGS130.
2) Connect iGS130 to power adaptor by USB cable. (Don't use
computers)
3) Hold left and right button at the same time more than 2 seconds until
“FA” display on the screen， it will show “Oh” once the setting
finished.
4) Disconnect iGS130 to power adaptor.
To Next Page
Loading...