WUNDER RA - Safety Precautions

WUNDER SA.BI.SRL EN USER MANUAL
RA(WU150) REV. 02- 10/01/2017 3
3. SAFETY
ATTENTION!
Operators must read this manual carefully, comply with the instructions it contains and become familiar with
the correct use and maintenance procedures of the instrument.
• Retain this manual for consultation and as a help in staff training.
• Do not overload the instrument beyond its maximum capacity.
• Do not apply loads abruptly.
• Do not press the keys with sharp or pointed objects.
• Do not try to open the instrument.
• Do not remove seals from the instrument.
• Do not short-circuit the battery terminals.
• Use only the power supply provided by Wunder. Before using it, make sure that the local mains voltage
is compatible with the voltage of the adapter shown on the identification plate.
• Regularly check the integrity of the instrument's power cord and make sure it does not come in contact
with hot appliances.
• Make sure that the power cord does not create obstruction hazards.
• Unplug the instrument before cleaning it.
• Do not place the instrument in water or other liquids.
• Perform maintenance and subsequent metric verifications regularly.
3.1 Manufacturer's guide and declaration – electromagnetic immunity
Guide and Statement of manufacturer – Electromagnetic emissions
The electronic scales RA model is scheduled for operation in the electromagnetic environment specified
below.
the customer and the user should ensure that it is used in that environment
Emission test
Conformity
Guide to electromagnetic environment
RF Emission CISPR11
Group 1 Class B
The scales RA model uses RF energy only for its internal
function. Therefore its RF emissions are very low and probably
not cause no interference in electrical equipment.
RF Emission CISPR11
Group 1, Class B
The scales RA is suitable for use in all sanitary and hospital
buildings, connected to the low voltage public power supply
network.
Harmonic emission
Class A
Voltage fluctuations/
flicker emission
Compliant