WUNDER RA - Functionality; BMI Function; Printer Functions

WUNDER SA.BI.SRL EN USER MANUAL
RA(WU150) REV. 02- 10/01/2017 10
7.4 BMI FUNCTION
Press BMI in weighing mode. The secondary display shows the last set height, with
the left digit flashing.
Use the number keypad to enter the height (e.g.: 170 cm)
Confirm with
Press HOLD to lock the value. Climb onto the weighing platform when the display
shows "HOLD" and weigh yourself. The scale shows the weight, height and BMI
index.
Press BMI again to release the memorized weight and go back to normal operation
mode.
7.5 TARE FUNCTION
This function allows displaying two weights. Switch-on the instrument using the key .
When the display indicates and a beep is emitted, position the objects (clothing) constituting
the tare, onto the weighing platform.
With the weight stable and the appearance of the stable symbol (circle), press and the display shows
. Ask the patient to climb onto the platform. The indicated weight represents the tare's net
value. Delete the memorized tare value by climbing down from the instrument and press again.
8. PRINTER FUNCTIONS
Weight can be printed for records using RS232 interface cable. After weighing simply press PRINT key to
print out the results
The format presented below is the standard format of results print-out and cannot be changed.
More informations info@wunder.it or service@wunder.it