12
7RRO6SHFLÀFDWLRQV
Battery pack
charger
ALG 18/4
Basic
ALG 18/6
FAST
Article number 5705 180
000
5705 860
000
Input 220 - 240V
50/60 Hz
220 - 240V
50/60 Hz
Input power 120 W 165 W
Output voltage 18 V DC 18 V DC
Output current 4.0 A 6.0 A
Battery type Lithium-Ion Lithium-Ion
Recommended
ambient charging
temperature
5°C - 40°C 5°C - 40°C
Storage temperature -25°C - 75°C -25°C - 75°C
Intended Use
This charger is only intended to charge Würth
18V battery packs listed in this manual.
The product is only for use indoors in dry conditions.
The product is not intended to charge any other type
of battery, to be used as a power supply, or for any
other purpose. It should never be used in explosive or
LQÁDPPDEOHHQYLURQPHQWV
Symbols
Read all safety warnings and all
instructions.
Warning
CE conformity
Class II equipment
For indoor use only.
Time-lag fuse 3.15A
T4.0A
Time-lag fuse 4.0A
Waste electrical products should
not be disposed of with household
waste. Please recycle where facilities
exist. Check with your local authority
or retailer for recycling advice.
Maintenance and Cleaning
˟ Disconnect the plug from the power
source and/or the battery pack from the
product before making any adjustments,
changing accessories or storing the
product. Such preventive safety measure
reduce the risk of starting the product
accidentally.
˟ Always ensure that ventilation openings
are kept clear of debris.
If the product should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by a Würth master service.
In all correspondence and spare parts orders, please
always include the article number given on the type
plate of the product.
The current spare parts list for the product can be
viewed in the Internet under “http://www.wuerth.
com/partsmanager” or requested from your next
:UWKEUDQFKRFH
Guarantee
For this Würth product, we provide a guarantee in
DFFRUGDQFHZLWKWKHOHJDOFRXQWU\VSHFLÀFUHJXODWLRQV
IURP WKH GDWH RI SXUFKDVH YHULÀHG E\ LQYRLFH RU
delivery document). Damage that has occurred will be
corrected by replacement or repair.
Damage caused by normal wear, overloading or