Würth ANG 310 - Page 13

13
Charger
Item 0700 915 220
Input voltage 220 – 240 V
50 – 60 Hz
Output voltage 14.4 V
Charging current (max.) 1.5 A
Charging time 1.3 Ah 50 min
2.6 Ah 100 min
Weight 0.5 kg
Lithium ionen battery
1.3 Ah Item 0700 915 13
2.6 Ah Item 0700 915 26
Nominal voltage 14.4 V
Number of cells 4/8
Cell type Li-ion
Capacity 1.3 Ah/ 2.6 Ah
Weight 0.35 kg/0.5 kg
Components (g. I)/(g. II)
1 Threaded mandrel/sleeve
2 Mouthpiece
3 Lock nut
4 Adjusting nut
5 Lock nut
6 Handle
7 Hexagonal recess
8 Spanner
9 Accessories magazine
10 Control light
11 Trigger
12 Battery
13 Hand guard
14 Slide
Proper use
The device is designed for processing rivet nuts
using genuine Würth system accessories.
The charger is designed for charging Würth Li-
ion batteries (1.3Ah/2.6Ah) using a voltage of
14.4V.
Any other use is considered improper use.
The user is liable for damage resulting
from improper use.