Operating controls
Prior to operating the machine, the user must famil-
iarize himself with all operational characteristics and
safety precautions
Survey (fig. I)
1
Sanding sheet
2
Rubber backing pad
3
Auxiliary handle (removable)
4
Knurled screw
5
Oscillation pre-selection thumbwheel
6
Locking button for continuous connection
7
ON/OFF switch
8
Allen key
9
Dust catching cartridge
10
Button for removal of dust catching cartridge
11
Locking button for “twin” oscillation range adjust-
ment *
12
Cleaning flap
13
Filter
14
Fastening screw of rubber backing pad
15
Brake ring of brake of rubber backing pad
*)
ETS 150-E twin
Intended use
he machine is intended for dry sanding of flat and
convex surfaces of wood, plastic, non-ferrous metal,
sheet metal and similar materials and for dry sanding
of painted or filled surfaces.
The user is liable for damage due to improper han-
dling.
For questions on the machine and its use call
our Advisory Services in Germany under:
0180- 60 65 69 (14 cent/min).
Tool specifications
Type
ETS 150-E
twin
ETS 125-E
Type 0702 129 X 0702 128 X
Rated input 350 W 320 W
Rated output 180 W 160 W
Now-load speed 4200 -
9200 min
-1
4200 -
9200 min
-1
No-load number of
vibrations
8400 -
18400 min
-1
8400 -
18400 min
-1
Rubber backing pad-Ø 150 mm 125 mm
Vibration range-Ø 2,8 und
6,2 mm
5 mm
Weight 2,2 kg 2,0 kg
Degree of protection
/ II / II
Product specifications
Rotary and oscillating movements of the rubber
backing pad guarantee the best possible results
Variospeed (V)-electronics
Thumbwheel for the pre-selection of the number
of oscillations
No scoring when the operating tool is placed
on the surface to be processed (brake of rubber
backing pad)
Removable auxiliary handle
Dust-protected ball bearings
Internal dust extraction
External dust extraction possible
Pull the plug of the power tool out of the
socket before you adjust the machine
or exchange accessories.
Such preventive
safety measure reduces the risk of starting the
power tool accidentally.
Store idle power tools out of the reach
of children. Make sure that no other per-
sons operate the power tool unless they
are familiar with it.
Power tools are danger-
ous in the hands of untrained users.
Clean the ventilation slots of your power
tool regularly.
A larger accumulation of met-
al dust may cause power dangers.
Only have your power tool repaired by
qualified professionals and only with
original spare parts.
This is the only way to
make sure that the power tool will remain safe
at all times.
For your safety
GB
To Next Page
Loading...
