What to do if Würth Measuring Instruments show measuring error due to too much background light?
If your Würth Measuring Instruments are showing a measuring error because there is too much background light, you should shadow the target area.
What to do if the reception signal is too weak or the measuring time is too long with Würth Measuring Instruments?
If you are experiencing a weak reception signal or the measuring time is too long with your Würth Measuring Instruments, try changing the target surface. For example, use white paper.
What to do if the laser beam is interrupted when using Würth Measuring Instruments?
If the laser beam is interrupted while using Würth Measuring Instruments, repeat the measurement.
What to do if Würth WDM 30 Measuring Instruments show the input signal is too high?
If your Würth Measuring Instruments are showing that the input signal is too high, try changing the target surface. For example, use white paper.
What to do if Würth WDM 30 show a measurement outside of the measuring range?
If your Würth Measuring Instruments are showing a measurement outside of the measuring range, mind the range.
Explains warning signs, signal words, and the structure of danger notices.
Notes on device handling, operating instructions, and schedule structures.
Details correct employment, foreseeable misuse, and general safety precautions.
Defines manufacturer and operator responsibilities concerning the device.
Details the device display elements, keys, and general overview.
Guides on inserting and changing batteries for reliable device operation.
Explains how surface properties affect measurements and potential errors.
Step-by-step guide to measuring a single distance using the device.
Instructions for continuous measurement, useful for staking out distances.
Procedure for calculating area using two measured distances.
Steps for calculating room volume using three measured distances.
Table of common error messages and their causes/corrections.
Provides detailed device specifications like laser class, range, and accuracy.
Covers EMC warnings, FCC statements, and safety regulations.
Warnings about direct laser beam exposure and bodily harm.
Information on laser class, type labels, and product labeling.
Instructions for cleaning the device with a soft cloth, avoiding harsh chemicals.
Details the warranty terms, exclusions, and claim process for the device.
Guidance on recycling materials and sorting packaging for eco-friendly recycling.
General| Type | Digital Multimeter |
|---|---|
| Continuity Test | Yes |
| Diode Test | Yes |
| Data Hold | Yes |
| Safety Rating | CAT III 600V |
| DC Current Range | 10A |
| Display | LCD |
To Next Page
