Controller Stations
Wyze Sprinkler is an 8-station controller. Each station is connected to a sprinkler
valve. The specific valve turns on when it receives a signal from the controller, and
then the sprinkler will start watering. When the watering task is finished, the
controller will shut off the valve and turn on the next one in sequence.
Step-by-Step Instructions
Step 1 Drilling on the wall
Drill two holes at the installation position, the size of the holes is φ 6mm × 40mm,
and the distance between the two holes is 90mm. If the installation wall is made of
wood, please see step 3.
To Next Page
Loading...
Need help?
General