Copyright © Vertical Leisure Ltd. 2017 | All rights reserved. Version: 1.02
15
Now that the A-FRAME has been fully assembled and the straps attached, it is now time to secure it in place using the
additional sand/weight bags.
4. Now the weight bags can be attached to each leg of the A-FRAME. When attaching the weight bags
using the clips, please make sure you place them through the loop on the sand bags. Now repeat
for all remaining legs.
Note: Make sure the sand bags are upright and the bottom
rests on the leg or base.
FILLING & ATTACHING SAND BAG
Sand
Clear Sealable Bag
3. The inner bags, once lled, must then be placed
inside the outer bags. The inner bags are supplied to
minimise risk of the contents spilling/leaking. Two inner
bags must be placed inside a single
outer.
1. Firstly the inner Clear Sealable bags must be lled with
sand/similar material - these hold around 5kg each.
2. The Clear Sealable bags must be then placed into the
inner bags carefully.
Inner Bag
Inner Bag
Outer Bag
Clip & Loop
Sand bag
Sand bag Sand bag
Sand bag
To Next Page
Loading...
Need help?
General