Copyright © Vertical Leisure Ltd. 2017 | All rights reserved. Version: 1.02
18
8. Remove connectors. (These are placed back in the square bag.)
9. Remove gure-8 connectors by loosening 5mm hex screws - push pin and slide o.
Push the pin in & pull out the Leg connector at the same time. Push the pin in & pull out the Leg connector at the same time.
10. Replace all the parts back in the bag.
Adjustable feet placed inside the pockets
Sleeves
Sleeves
Top Bar
Velcro pads
Velcro pads
Telescopic Legs
To Next Page
Loading...