Copyright © Vertical Leisure Ltd. 2017 | All rights reserved. Version: 1.02
17
4. Now that the extended legs have been retracted, and your A-Frame is at the minimum height. Please make sure the
pins above the feet are re-inserted to hold the legs in place when they are placed back into the carry cases.
5. Now remove any apparatus attached to your A-FRAME.
6. Now lay the A-FRAME down so the top bar
is touching the oor. Fig. 3.4
7. Remove the raised legs in the air rst, then remove the legs touching the oor.
Fig 3.4
Fig 3.5
1
2
3
4
To Next Page
Loading...