EasyManua.ls Logo

X-PROGRAM X-A10 - Specifications

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
We follow a policy of continuous advancement in
development.
For this reason all or part of specifications & designs
may be changed without prior notice.
14
X-program X-A10 X-A20
Number of channels 1 2
Amplifier class AB AB
Power output, 4 ohm (0,1% THD) 200 W 2 x 50 W
Power output, 2 ohm (0,2% THD) 300 W 2 x 70 W
Power output, 4 ohm bridged N/A 1 x 140 W
Signal to noise ratio, A-weighted >90 dB >90 dB
Damping factor >80 >80
Frequency response 20 Hz - 30 kHz 20 Hz - 30 kHz
Input impedance, low level 22 kohm 22 kohm
Input impedance, high level 220 ohm 220 ohm
High level input with auto start Yes Yes
Parallel input switch - -
Input sensitivity 0,25 - 5V 0,25 - 5V
Filter subsonic @ 25 Hz Yes Yes
Filter high-pass Off / 70 / 90 Hz Off / 70 / 90 Hz
Filter low pass variable 50-250 Hz* 50-200 Hz *
* can be switched in/out (18 dB/oct)
Built-in fan cooling Yes -
Power consumption, idle 0,8 A 0,4 A
Power consumption, max 65A 35A
Fuse 2 x 25 A 1 x 25 A
Dimensions HxWxD(mm) 72 x 255 x 358 72 x 255 x 278
Dimensions (inch) 2,8 x 10 x 14 2,8 x 10 x 10,9
Weight 3 kg 2,3 kg
X-program X-A30 X-A40
Number of channels 3 4
Amplifier class AB AB
Power output, 4 ohm (0,1% THD) 2 x 50 W 4 x 50 W
Power output, 2 ohm (0,2% THD) 2 x 70 W 4 x 70 W
Power output, 4 ohm bridged 1 x 140 W 2 x 140 W
Power out mono sub ch. 4 ohm 1 x 120 W N/A
Power out mono sub ch. 2 ohm 1 x 180 W N/A
Signal to noise ratio, A-weighted >90 dB >90 dB
Damping factor >80 >80
Frequency response 20 Hz - 30 kHz 20 Hz - 30 kHz
Input impedance, low level 22 kohm 22 kohm
Input impedance, high level 220 ohm 220 ohm
High level input with auto start Yes Yes
Input sensitivity 0,25 - 5V 0,25 - 5V
Filter high pass, front channels Off / 70 / 90 Hz Off / 70 / 90 Hz
Filter low pass, rear channels 50 - 100 Hz*
Filter low pass Sub channel 50 - 100 Hz
Filter subsonic @ 25 Hz Yes, on all channels Yes, on all channels
* can be switched in/out
Power consumption, idle 0,7 A 0,5 A
Power consumption, max 50 A 50 A
Fuse 2 x 25 A 2 x 20 A
Dimensions HxWxD(mm) 72 x 255 x 378 72 x 255 x 398
Dimensions (inch) 2,8 x 10 x14,9 2,8 x 10 x 15,7
Weight 3,2 kg 3,5 kg
All above output power
ratings at 14,4 VDC