Why does my X-Tronic 4020-PRO-X soldering iron rattle?
The "rattle" you hear in your X-Tronic Power Tool's soldering iron is normal. It's a small ball that lets the unit know when the soldering iron isn't being used, so it can go into Sleep Mode.
Lists all items included in the product package, such as the main unit, gun, holder, and nozzles.
Explains the process of installing and removing hot air nozzles using the patented rack.
Describes the automatic cooling process when the gun is returned to the holder.
How to switch the temperature display between Celsius (°C) and Fahrenheit (°F).
Explains how to enable or disable audible beeps for button presses.
Details how to save and recall specific temperature and airflow settings.
Explains when and how to calibrate the unit's temperature readings for accuracy.
Step-by-step instructions for replacing the heating element in the hot air gun.
Defines who is covered by the warranty, typically the original purchaser.
Details what defects and issues are covered under the warranty terms.
Lists damages or issues that are explicitly not covered by the warranty.
Specifies the total duration and periods of the limited warranty.
Outlines the options available to the consumer for warranty claims (repair, replacement, refund).
Provides instructions on how to contact the manufacturer for warranty service.
States the limits of the manufacturer's liability regarding defective products.
General| Heating Element | Ceramic |
|---|---|
| Included Tips | 5 |
| ESD Safe | Yes |
| Temperature Stability | ±2.0°C |
| Display | Digital |
To Next Page
