Need help?Do you have a question about the Xantrex AGS and is the answer not in the manual?
General| Battery Voltage Sensing | Yes |
|---|---|
| Remote Start Capability | Yes |
| Model | AGS |
| Input Voltage | 12 VDC |
| Output | Generator start/stop signals |
| Control Method | Automatic or manual |
| Operating Temperature Range | -20°C to +60°C (-4°F to +140°F) |
| Communication Ports | RS232 |
| Compatible Generators | Various diesel and gas generators |
| Status Indicators | LED indicators |
Outlines the primary functionalities of the AGS system, such as automatic starting and time-based control.
Details crucial safety information, fuse replacement, power source requirements, and servicing recommendations.
Explains key features like automatic battery charging, HVAC integration, quiet time settings, and status monitoring.
Clarifies the system's purpose, benefits for user comfort, and specific use cases it is not designed for.
Describes how the AGS monitors battery levels and thermostats to initiate and manage generator operation.
Explains the meaning of the GEN ON and GEN FAULT lights on the AGS remote panel for monitoring generator status.
Details the ON/OFF switch functionality and the AUTO/AUTO QUIET modes for managing generator activation.
Guides users through setting the local time and selecting the correct time zone using the remote panel controls.
Provides step-by-step instructions for defining the start and end times of Quiet Time to prevent unwanted generator operation.
Instructions for placing safety labels and general precautions during installation of the AGS system.
Details the dimensions, cutout size, and mounting procedures for the AGS Remote Panel.
Guidelines for selecting a mounting location and maximum cable length for the AGS Controller.
Explains the purpose of each terminal on the AGS controller's DC connector, including power, signals, and thermostats.
Presents a visual schematic of the 16-pin DC connector, detailing the pin assignments for the AGS controller.
Information on mating connectors, pins, and the recommended AGS harness for reliable installation.
Illustrates the layout of the AGS Remote Panel, including its display, buttons, and indicator lights.
Shows the AGS Controller unit and the necessary data cable for communication with the remote panel.
Addresses user inquiries about display behavior, sleep mode, and timing delays in the AGS operation.
Lists essential system parameters such as low battery voltage set point, generator run times, and start attempt limits.
Provides diagnostic steps and solutions for issues like display problems, generator start/stop failures, and wiring errors.
Defines important terms and acronyms used throughout the AGS Owner's Manual for clarity.
Details the warranty period, transferability, and the process for contacting Xantrex for service.
Specifies what the warranty does not cover and outlines Xantrex's liability limitations for product use.
Covers user rights, product use restrictions (e.g., life support), and the RMA process for returns.
Explains packaging requirements, necessary documentation, and shipping instructions for returning products under warranty.
Lists part numbers, dimensions, weight, electrical inputs/outputs, and environmental operating conditions for the AGS system.
To Next Page